High Quality Fiberglass Geogrid Paving Composite reinforcement Geogrid
| PHYSICAL PROPERTIES | TEST METHOD | UNIT | MINIMUM AVERAGE ROLL VALUE |
| Mass per Unit Area(Typical) | ASTM D-5261 | oz/yd2(g/m2) | 10.3(350) |
| Aperture Size (Grid) (MD/TD)(Typical) |
Measured | in(mm) | 1.2/1.2(30/30) |
| Percent Open Aera (Grid only) | COE Method | % | 70+ |
| Wide Width Tensile Strength1 @ Ultimate (MD/TD) | ASTM D-6637 | lb/ft (kN/m) | 3426/3426 (50/50) |
| Elongation at Break (Typical) | ASTM D-6637 | % | <3 |
| Melting Point |
ASTM D-276 |
ºF (ºC) | >425(>218) |
| Roll Dimensions (Max.Width×Length) | — | ft(m) |
7.22×328.1(2.20×100) |
| 12.5×246(3.81×75) | |||
| Roll Area | — | yd2 (m2) | 236.1 (220) |
| 341.67 (285.75( | |||
| Roll Weight (Gross) | — | lb (kg) | 190 (86) |
| 247 (112) |
NOTES: 1: ALL values stated here are Minmum Average Roll Values and based on a 95% confidence level unless otherwise \
noted.(MD—Machine Direction; TD—Transverse Direction, also called Cross Machine Direction
Applications
1.Road widening.
2.Road repairing.
3.Reinforcement of flexible pavement and concrete pavement..
Characteristics
1. High modulus material.
2.High temperature resistance.
3.High bonding property and separation.
4.Excellent compatibility for asphalt mixture
Our asphalt reinforcement solutions are used to address highway problems:
- Reflective cracking
- Thermal and fatigue cracking
- Rutting and shoving
- Haunching failure
- High-axle loads
- Construction on peat soils
- Differential settlement
- Weak subgrades
- Reduced construction layer thickness
Reducing the whole life cost through effective reinforcement. The reinforcement of asphalt
pavements can produce a threefold increase in the service life of highway pavements by reducing fatigue, reflective, thermal and settlement cracking. With increased fatigue life and extended
maintenance intervals, the “whole life cost” of a reinforced pavement is less than an unreinforced one.
Reinforcement reduces road stress. Stress concentrations in the asphalt matrix are relieved and
redistributed by the reinforcement, resulting in:
- Delayed initiation of cracks, slower crack growth
- Narrower crack width
- Wider spacing between cracks
- Deviation of cracks
Q:Where is your company located ?
A: :Hi-tech Developlopment Zone, Feicheng City, ShanDong province, China
Q:What’s your delivery method ?
A:container transportation, by Train or Air ,according to your project request
Q: What's your MOQ quantity ?
A:MOQ is one 20' container , the quantity could be negotiable .
Q: Are you trading company or manufacturer ?
A: Biggest Geosynthetics factory in China, Welcome to visit us,
Q: How long is your delivery time?
A: Generally it is 7-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, Free Samples but do not pay the cost of freight.
Q: What is your terms of payment ?
A: TT ,L/C
If you have another question, pls feel free to contact us as below:
Whatsapp: +86-18660849990
