Electromagnetic Shielding Conductive Cloth for Wallet
vProduct introduction
Conductive fabric is based on fiber cloth (commonly used polyester fiber cloth). After pre-treatment, plated metal coating is applied to make it have metal properties. It can be used to coat conductive pressure sensitive adhesives or bond hot melt adhesives to coat polyurethane foam cotton.
vProduct structure
vProduct performance
1, Low impedance, good electromagnetic shielding performanceand conductive grounding performance;
2, Excellent flexibility and conformity;
3, It has good water affinity and high adhesion to acrylate isobaric adhesive;
4, Good die-cutting, no wool,easy to process.
vProduct characteristics
|
Characteristics |
Standard value |
Testing standard |
|
color |
gray |
/ |
|
thickness(mm) |
0.02±0.003 |
ASTM D3652 |
|
width(mm) |
1080 |
|
|
base weight(g/square meter) |
21.3 |
ASTM F390 |
|
surface resistance(Ω) |
≤ 0.05 |
ASTM F390 |
|
vertical resistance(Ω) |
≤ 0.03 |
|
|
@10MHz~3GHz(dB) shieldingeffectiveness |
≥75 |
SJ20524-1995 |
|
grad |
Four above |
AATCC TM8-2001 |
vProduct application
This product can be used as semi-finished product for coating conductive pressure sensitive adhesives or bonding hot melt adhesives to coat polyurethane foam cotton, for internal structural parts of electronic products such as mobile phones, tablet computers, notebook computers, such as FPC, PCB, speakers, loudspeakers, speakers, etc. Electromagnetic shielding and static discharge of antenna, camera and other modules.
vTerm of use and storage conditions
Best use life:24 months;
Optimum storage condition:6℃~34℃/0~65%RH in the packing box.