45# seamless steel pipe

The parts of 45# seamless steel tube after quenching and tempering have good comprehensive mechanical properties and are widely used in various important structural parts, especially those connecting rods, bolts, gears and shafts that work under alternating loads. But the surface hardness is low and it is not wear-resistant. Can be quenched and tempered + surface quenching to improve the surface hardness of parts.

chemical composition:

The carbon (C) content is 0.42~0.50%, the Si content is 0.17~0.37%, the Mn content is 0.50~0.80%, and the Cr content is <=0.25%.

Process:

Tube blank-inspection-peeling-inspection-heating-perforation-pickling-grinding-lubrication and air drying-welding head-cold drawing-solution treatment-pickling-pickling Passivation-inspection-cold rolling-degreasing-cutting-air drying-internal polishing-external polishing-inspection-marking-finished product packaging.

performance:

Tensile strength: not less than 600Mpa

Yield strength: not less than 355Mpa

Elongation: 10%

Shrinkage rate: 40%

Impact power: 39J