Coated heat shrink sleeve for fiber optic closure (terminal box) is with a layer of spiral coated hot melt adhesive in the internal surface. Out layer offer reliable protection. High quality hot melt adhesive provide excellent watertight and conversation leaking from terminal box.
Features
1. low smoke, non-toxic, flame retardant
2. shrinkage ratio: 2: 1
3. shrink temperature: 84 ~ 120C
4. Rated temperature: -55 ~ 125C
5. soft, shrink fast, stable performance
Parameter
|
Normal size (mm) |
As supplied(mm) |
After recovered (mm) |
Tube shape |
Standard length |
|
|
Inside diameter(Min.) |
Inside Diameter(Max.) |
Wall thickness(Min.) | |||
|
HSTFC-33/8 |
33 |
8 |
2.5 |
O |
150,200,250mm |
|
HSTFC-40/12 |
40 |
12 |
2.5 |
O |
150,200,250mm |
|
HSTFC-44/14 |
44 |
14 |
2.5 |
O |
150,200,250mm |
|
HSTFC-55/16 |
55 |
16 |
3.0 |
O |
150,200,250mm |
|
HSTFC-75/22 |
75 |
22 |
3.0 |
O |
150,200,250mm |
|
HSTFC-95/25 |
95 |
25 |
3.0 |
O |
150,200,250mm |
|
HSTFC-115/34 |
115 |
34 |
3.0 |
O |
150,200,250mm |
|
HSTFC-140/42 |
140 |
42 |
3.0 |
O |
150,200,250mm |
Detail
◆This is a flexible, flame-retardant, dual wall, high-shrink-ratio, irradiated heat-shrinkable tubing manufactured by co-extrusion of polyolefin and hot-melt adhesive.
◆It is widely used to environmentally seal and protect interconnections, joints and components from fluids, moisture and corrosion.
◆High shrinking ratio allows for connector-to-cable sealing and makes it possible to repair most damaged cable jackets without removing connectors.
Our Factory
Our Service
From the design of new products to the re-engineering of existing products for quality improvement or cost reduction, our engineering team is capable of meeting our customers' requirements.
FAQ
Q:Can I use a lighter for heat shrink tubing?
A:For small ID and thin wall heat shrink tubes, we can use lighter to shrink them.
Q:Can you cut heat shrink tubing
A:Yes,our machine can cut tubes into your required length,such as 10mm/pcs, 30mm/pcs, or 50mm/pcs,etc.
Q:Can you use a hair dryer for heat shrink tubing
A:Thin wall tubes can be shrink by hair dryer, such as our tube model A-2(NH), it can begin shrink at 70℃, but for medium and heavy wall tubes shrinking, it's better to use a heat gun.
Q:Can I print my logo on the products?
A: Yes, please send us your logo design.
Packing And Shipping
