Fiber laser cutting machine has become an indispensable processing equipment in the modern sheet metal industry. With the upgrading of the industry, the increase in processing requirements has not only improved the efficiency, but also achieved the ultimate in the optimization of operations. Let's introduce the specific operation process of fiber laser cutting machine.
Operation steps of fiber laser cutting machine:
1. Determine the material to be processed, fix the sheet metal material on the processing machine, and then determine the stability of the material placement, so as to avoid jitter during the cutting process, resulting in insufficient cutting accuracy.
2. Manually start the machine at low speed in the X and Y directions after turning it on, and check for any abnormalities. After entering a new workpiece program, you should first try it out and check its operation.
3. Operate the console, enter the product cutting pattern, and the thickness of the cutting material and other parameters, and then adjust the cutting head to the appropriate focus position, and then introspect and adjust the nozzle center.
4. When working, pay attention to observe the operation of the machine tool, so as to avoid the cutting machine out of the effective travel range or the collision caused by the collision of the two machines.
5. Start the regulator and the chiller, and set the water temperature and pressure of the chiller.
6. Turn on the laser, and then turn on the machine.
Although the above four points are very brief, in the actual operation process, it takes a lot of time to practice and familiarize with the details of each operation.