Self-adhesive fragile labels are generally attached to machines, computers, metals, plastics, etc. for anti-counterfeiting identification or warranty labels. It is often not easy when people want to tear off this label, because it is an anti-counterfeiting label, and it will be firmly stuck on any object. The following methods can help you solve: How to remove fragile stickers. Although the self-adhesive label is a very good label, it can sometimes cause trouble for people. For example, the newly purchased kitchen utensils or sanitary ware supplies, you need to remove the above sticker, or it is very unsightly, and it is also a problem to bring a label when using it. However, the sticker is difficult to remove. If it is not cleaned, a sticky layer of glue will be left on the item. After a long time, the dirt will stick and the item will appear unclean. In fact, not only kitchen utensils and sanitary ware products have such problems, some other things like plastic products, glass products, ceramic products, etc., when they are bought, they are mostly affixed with stickers. Although the things on the surface can be removed, but The sticky glue on the bottom layer is difficult to clean.
1. metal needle removal method: You need to prepare a metal needle or toothpick (the thinner the better), and another rubber. Be careful to lift it gently from one end (be careful not to force it in the direction of the object to be attached, be sure to force it outward). In this way, it is possible to pick out the large area at once (don't let the dropped label fall on other things, otherwise it will become a second pollution). There will also be residual glue when the strength is different. At this time, use rubber to gently wipe it (be careful to choose the location where the rubber night falls).
2. Eraser
For some traces of residual adhesive on the surface, you can also erase it once, and then remove the hair left by the eraser.
3. Direct trimming
If there is a stubborn adhesive on the carpet, you can carefully trim off the adhesive traces on the top of the carpet fluff directly, without affecting the quality of the carpet.
4. Hair dryer
For the adhesive on the plastic products, you can use the hot file of the hair dryer to blow the adhesive, and then slowly tear it off. However, almost all of us have hair dryers. Using hair dryers can also solve annoying labels. Use the hot air of the hair dryer to bake the label, but keep it at a certain distance, not too close, and do not continue to bake for a long time. When you touch the label with your hand and it is already slightly hot, you can use your nails or sharp tweezers to try to lift it from the corner of the label. Since the adhesive will become sticky when heated, it will tear better than when it is dry. However, it is not from heat to glue to water. The stickiness is still there. When tearing it, it should not be too fast or too fierce. You must be careful and patient. It is best to lift the surface at a 45-degree angle to the original surface. " Lift up, not yank and tear. As long as you have patience, the label can be torn off without leaving a little offset on the box.
5. Hot water
Wet the towel with hot water first, then wipe it repeatedly on the self-adhesive traces, then dip the wet towel with soap, wipe it repeatedly on the traces, and finally wipe the soap foam with a clean warm towel Okay.
6, lemon juice
If these stickers get on the skin, you can use lemon juice to remove. 7. Hand cream Hand cream can also achieve the effect of removing stickers, because the hand cream contains a lot of water, and the water contains a certain amount of surfactant. This surfactant has good wetting, penetration and dissolving ability, and can quickly penetrate between the sticker and the surface of the object, so as to achieve the purpose of removal. Some similar products, such as creams, facial cleansers and cleansers also have certain effects.