All categories of high-pressure hoses and installation precautions
There are some types of high-pressure hoses: high-pressure braided hoses, high-pressure entangled hoses, high-pressure hose assemblies, high-pressure hoses for mining, high-pressure hoses, etc. He is very used in coal mines, mines, chemicals, capitalism, automobiles and other industries. widely. The widespread use of high-pressure hose also makes his structural parts take a wide range of applications.
When it comes to high-pressure hoses, we will always talk about the knowledge of high-pressure hoses. Hose knows that we have also talked about them in detail, but some people have not asked about the use of high-pressure hoses and models. His basic concepts and graphics.
After talking about his sorting, we will talk about the precautions for setting up high-pressure hoses:
(1) The high-pressure hose is not able to bend excessively even when it is moving or does not move, nor can it be bent at the root, and it must be bent at least 1.5 times its diameter;
(2) When the high-pressure hose is raised to the most position, it should not be pulled too tight, and it should be relatively slack;
(3) Try to avoid torsional deformation of high-pressure hose;
(4) The high-pressure hose is as far away as possible from the heat radiating element, and it is necessary to wear a heat insulation board;
(5) The exterior of the high-pressure hose should be protected from damage, such as long-term rubbing on the outside of the same component in the caller;
(6) If the high-pressure hose is too deformed due to its weight, it should be supported.