The reliability of led garden lighting depends largely on heat, so the level is the key technology to improve cooling. It mainly solves the problem that the excess heat generated by the chip spreads through the radiator to cool the body, which is a very complicated technical problem.
From the perspective of standardization, each led courtyard lamp luminaire manufacturer has different specifications, and the smart control device specification is not one.If the smart device manufacturer develops the control range and interface standard of the luminaire, the lighting manufacturer will set aside its own based on the smart device interface standard Lighting control interface. Therefore, smart choice and use of the system will increase the degree of freedom and promote the advantages.
According to the dimming of ambient light in this way, there have been road lighting applications in the past, but usually the light sensing device installed in each lamp does not require communication between the lamp and the device, and the photosensitive device only needs to automatically adjust the brightness output. This method is difficult to achieve uniformity of dimming and is subject to dust. But the light control mode does have its own advantages. For example, in the case of sudden weather conditions, the brightness can be adjusted, which plays a good role in emergency response. Therefore, in the future, you can consider installing photosensitive devices in some places.These photosensitive devices and centralized communication controllers collect the ambient light values.The centralized controller reports the centralized controller.The centralized controller is based on the ambient light and the program given by its own group value. The output brightness of the LED courtyard lights changes.
There are two kinds of new technologies for the development of led garden lamp lighting products: first, in order to increase the flux of a tube, inject a greater current density, as mentioned below, causing more heat to be generated by the chip and requiring cooling . Second, the new structure of the package, as the power of the LED garden light source increases, a collection of multiple power led garden light chips packaged together, such as a sturdy structure, modular lamps, etc., will produce more For heat, more effective heat dissipation structure and measures are needed to raise new heat-supply problems, otherwise it will greatly affect the performance and life of led garden lights.
Garden lights are also a kind of lighting fixtures, mainly used in urban roads, community roads, industrial parks, landscape lighting, tourist attractions, park courtyards, green belts, square lamp lighting and lighting decoration.
Garden lights can significantly improve the living environment and the quality of life of residents. During the daytime, the courtyard lamps and lanterns embellish the city scenery; at night, the courtyard lamps and lanterns can not only provide the necessary lighting and the convenience of life, increase the residents' sense of safety, but also highlight the highlights of the city and interpret the bright style. Modern courtyard lighting not only provides good lighting, but also uses lighting to show the building's own characteristics and unique style, and is in harmony with the environment.