2. In order to ensure safety, it is forbidden to use rope knots at high temperatures. Appearance inspection should be done every time, and use should be stopped immediately if damage is found.
3. Installation should be strictly in accordance with the requirements of the standards. When cooperating with other equipment, it should be installed under the guidance of the licensee. The selection of ropes should match the actual pulling force requirements. Special equipment should be selected to fix, and no hasty installation should be allowed.
4 When the rope is first used, it should be laid down, pierced into the rope feeder through the middle hole, rolled open, and not disc-type safety rope.
5. Load test should be done before the safety rope is reused. only after passing the test can it continue to be used. If abnormal is found, it should be scrapped.
6. Store the rope in a dry and ventilated warehouse. It should be kept clean frequently. It should not be exposed to open fire, acid, collision with sharp objects or exposure to sunlight.