PVC soft board is a kind of high-quality plastic material, which is made of PVC resin by plasticizer, stabilizer and other extrusion molding. The surface of pvc soft board is shiny and soft. Wide range of applications. However, PVC materials should be thinner than soft ones. In many cases, PVC materials can be as thin as plastics. Therefore, you must pay attention to these products when using them. Today Jintiancheng Plastic Products Co., Ltd. will introduce to you the precautions for the use and maintenance of flexible boards.
There are also many things to pay attention to when installing PVC flexible boards.
1. First of all, note that the blanking should be based on the actual size of the floor of the room. When cutting, the soft pvc soft board should be laid on the ground or the operating platform, the cutting line should be drawn on the board surface, and cut with a V-shaped slit cutter. The edge of the board should be cut into a smooth groove, and the angle of the slope and mouth of the two boards should be about 55 degrees. The day before the soft PVC floor is officially pasted, it should be pre-paved according to the grid. When paving, try to take care of the same color tone and thickness.
2. The soft board should be regularly maintained to remove all kinds of dirt on the ground in a timely manner. Degrease and pour the water-based degreaser stock solution onto the towel. Wipe the large area of greasy dirt with a wiper; black offset printing can tell the polisher to add The white polishing pad is polished. For the long-term black offset printing, you can pour the strong black offset printing agent directly on the towel to wipe the treatment; glue or chewing gum, use a professional strong degumming agent directly pour on the towel to wipe off.
3. It is forbidden to immerse the floor in water. Although some grounds use waterproof glue to cut off the water source, who is soaked for a long time will seriously affect the service life of the plastic floor. In the cleaning process, absorb the water in a timely manner.
4. For places with more people and heavy wear, the maintenance period should be shortened, and the waxing frequency of high wall wax should be increased.
5. It is forbidden to use hard and rough cleaning utensils, such as steel balls, scouring pads, etc., to prevent sharp objects from colliding with the elastic floor.
6. Foot pads can be placed at the entrance of public places with high traffic to prevent sharp objects from colliding with the elastic floor.