According to the results of the normal temperature yield test, the stainless steel manufacturer shows:
(1) From the stress test and the bending test, it can be seen that the large stress point of the unreinforced stainless steel tee is always on the abdomen, and begins to bend on the abdomen. Such as the use of single tendons and exercise style enhancement, the ps value has a very large level of advance and yield at the shoulder. This shows that by adopting the reinforced structure, the weakness can be moved from the abdomen to the shoulder, so that the strength weakening caused by the opening of the main pipe can be compensated at a certain level.
(2) Stainless steel tee of similar specifications (price 273 X 22 mm), after using single reinforcement. The value is enhanced by no. .535 advances to 0.755.
(3) Two different sizes of butterfly-type reinforced stainless steel tees (prices 219x6 mm and 470 x 12.5 mm), if the monthly values are closer, the IP value of the larger diameter stainless steel tees is lower.