Our users are using freezers more and more frequently. Do you know how to use freezers to save electricity? The fresh vending machine manufacturers here give us tips on how to use freezers to save electricity.
1. Frequent dust removal: The condenser on the back is easy to accumulate dust, and oil will adhere to the condenser of the refrigerator in the kitchen. This is suitable for covering the heat sink with a layer of quilt", which is bad for heat dissipation. Therefore, the condenser is wiped once every two to three months.
2. Placement position: Most users have noticed that the freezer is not placed near the heat source and in direct sunlight, but they often fail to pay attention to the ventilation conditions of the freezer. In fact, the relationship between ventilation conditions and cooling power is appropriately large. After testing and comparison, at least 22% of electricity can be saved. If conditions permit, if the back of the freezer is 20 cm away from the wall (closer to the wall all the time), the power saving effect will be successful.
3. The fresh food vending machine should keep some gaps between the food and the box wall to facilitate convection. If the food yard is too dense, the food in the lower layer often cannot get a low enough temperature. It is bound to choose a strong cold temperature adjustment gear. This consumes electricity, and the compressor starts frequently, reducing the life of the compressor, but refrigerating The food should not be too little. The empty freezer exchanges heat quickly with the outside world, which is also bad for energy saving. The door seal is intact: the debris on the door seal tape should be removed in time, but it cannot be scrubbed with alcohol or oil. The quality of the door seal tape is one of the keys to the cooling power of the refrigerator.
Four. Fresh vending machines reduce door opening: The test shows that for every 1 minute of opening the door, the power consumption increases by nearly 0.01 degrees, and the working time of the compressor is about 5 minutes. The double-door freezer only opens one door at a time, so there is less heat exchange. Inspired by the double-door freezer, you can add a spacer curtain to the single-door freezer, and use a plastic film (or cotton cloth) to hang a curtain on the front of each layer. After opening the freezer door, take the food on which layer and lift the curtain on which layer, so that the heat exchange is much less. Using this method throughout the year will have a significant power saving effect.