product manual
The office of the company is an area where everyone often goes, and the sofa is also indispensable. So, how to choose the TV wall in the office living room? How to maintain it? This question should be something that many friends want to know. Wood industry will tell everyone.
The sofa can be divided into leather sofa, cloth sofa, wooden sofa, rattan sofa, etc.
1. Leather products have strong absorption capacity and should pay attention to stain resistance. It is best to use leather product softener once in spring and autumn. Do not scrub the sofa with all your strength when scrubbing the sofa to prevent damage to the outer skin.
2. once a week, wipe the sofa gently with a clean cotton towel soaked in water and dried. If there is dirt on the leather product, wipe it with a clean wet sponge dipped in detergent, or use a cloth dipped in soap with a moderate concentration value, and then let it dry naturally.
3. If there are holes, worn-out, or ablated conditions, please ask professionals to remove them.
4. The leather sofa should be placed in a naturally ventilated and dry place. It is not suitable for scrubbing or washing with tap water to prevent clammy, mildew and insects.
How to choose the TV wall in the office living room?
1. The exterior design of the sofa. The appearance of the sofa should be round and uniform, the height should be moderate, and the fabric should have no significant color cast. The pattern design of the fabric with patterns such as stripes and grids should be relatively symmetrical. The fabric has no defects such as damage, dirt, or needle removal. The suture has no needle or floating thread. The exposed foam nails should be sorted neatly and have no shortcomings such as loosening, flattening, and paint.
2. The wooden parts of the wooden sofa. The wooden parts of the wooden sofa shall not have gaps or looseness; the surface paint layer is smooth and clean, the color is similar, and the paint layer does not fall.
3. The structural compressive strength of the sofa. At the time of purchase, the hand-cranked sofa guardrail and the back of the chair have no feeling of shaking, loosening or sound, and touch the seat and back of the sofa with your hands, and press hard for 2 to 3 times. The touch is leveled, and there is no yellowish friction. based on the feeling of work pressure, estimate whether the sofa sitting on the sofa will bear the physical work pressure for a long time.
4. Leather products and sofa leather products materials regulations. Standard in the manufacturing industry: All products labeled as full-leather sofas are covered with pure natural small animal leather products except for the bottom of the sofa seating surface. Tolerable leather products sofa products require that the sitting surface of the sofa, the front of the seat back, the upper edge of the seat back, the inner side of the guardrail and the upper edge of the guardrail should be covered with pure natural small animal leather products.
5. The key specifications of the sofa. The national standard of QB/T1952.1-2003 "Soft Furniture and Sofa" requires: the seat height of the sofa is 360Mm~420Mm; the seat height is between 480Mm~600Mm; the height of the guardrail is not more than 250Mm. The back height is greater than 600Mm. This key specification requirement is mainly the basic requirement when considering the application.