For the vertical (flat bottom) water tank, a layer of fine sand can be spread on the bottom to make the base evenly contact. Both horizontal water tanks and vertical water tanks less than 3T are equipped with tripods, and the tripods must be leveled during installation.
The sewage outlet is used to clean up the dirt. It can be connected to the sewage, or it can be installed with a threaded plug to discharge the sewage, which is handled by the user according to the situation.
The overflow port is used for water tank exhaust and overflow when the float valve fails. It can be connected to the sewage or drain the ground. The vertical (flat-bottom) water tank is equipped with a flange with holes on the bottom side. When installing, it can be fixed with iron wire and the wall tightly or fixed with expansion screws on a separate foundation.
The float valve should be inspected regularly (generally from January to March), and if any failure is found, it should be repaired in time.
As the secondary equipment for storing domestic water, the stainless steel water tank can only be filled with domestic water (fire fighting water), not with hydrochloric acid, sulfuric acid, or liquids with large acidic or alkaline content.
During the use of the water tank, do not place other heavy equipment on the top of the water tank, do not use hard objects to hit or draw the layout and pipe fittings of the water tank at will. If there is any problem, please notify the manufacturer’s technical maintenance personnel and maintenance welding personnel in advance. The requirement is to specialize in argon arc welding. Professionals who work should drain the water during maintenance. Maintenance personnel regularly observe the usage of internal and external main components and accessories in the water tank every month, and report any problems to the manufacturer in a timely manner.
Do not open the inlet cover of the water tank at will to prevent secondary pollution of the water quality. The water tank is regularly cleaned and disinfected 1-2 times a year.
Assembled stainless steel welded water tank refers to a new type of water tank that is stamped with a stainless steel plate with a certain concave and convex shape to greatly improve its rigidity, and then welded into a thin shell box. It is a domestic, beautiful and applicable water tank with exquisite structure. , Reasonable, advanced, with low materials, and can be widely used in civil and industrial buildings. It is an ideal equipment for storing and regulating water.
The stainless steel water tank has reasonable structural design, fully welded on-site combination, high strength, good sealing, prevents secondary pollution of water quality, never leaks, light weight, is one-half of ordinary steel water tank, reasonable price, neat and bright appearance , Beautiful, practical and other features.