2) The ingredients should be accurately measured and stirred evenly according to the specified mixing ratio, and the amount of each ingredient must be painted within the specified operable time;
3) In the weak parts such as basement floor, side wall inner and outer corners and detailed structure, the polymer flexible waterproof mortar should be prepared according to the appropriate proportion, and evenly scraped together for additional reinforcement layer treatment;
4) Brushing should be done in layers, generally 3 to 4 times vertically and horizontally, until it reaches the thickness required by the design. It is advisable to apply one line before the coating interval without sticking to the hands, the interval time is about 30 minutes;
5) End-up treatment: waterproof All end-ends should be flattened with sealing materials, and the carcass reinforcement material at the end-end should be pressed into the groove without warping, wrinkles, etc.