The sodium hypochlorite generator system automatically dissolves salt, dilutes the proportioned brine, automatic electrolysis, automatic storage, automatic dosing, no human operation is required, and the entire operation process is displayed on the LCD screen and can be touch-controlled. The system is equipped with a large-capacity memory to store one For historical operating data and historical graphs within the month, the system can be connected to the Ethernet, and all data can be sent to the remote control center, which can monitor and remotely control the system through the remote control center.
The liquid level in the sodium hypochlorite storage tank starts pharmacy (concentrated brine metering pump, concentrated brine electric valve, dilution water pump, dilution water electric valve, discharge valve, hydrogen exhaust fan, rectifier switch start), high liquid level stops the pharmaceutical concentrated brine metering pump, The electric valve of concentrated brine, the electric valve of dilution water, the electric valve of dilution water, the discharge valve, the hydrogen exhaust fan and the rectifier switch are closed)
1. Confirm that the flow of the concentrated brine flowmeter is 70l/h;
2. Confirm that the dilution water flowmeter is running at 410l/h;
3. The electrolysis current is 188a and the electrolysis voltage is within 64v;
4. The sodium hypochlorite storage tank can display the actual level of the sodium hypochlorite solution;
5. For the dosing of sodium hypochlorite solution, the equipment is equipped with two dosing pumps, confirm that the relevant pipeline valves that need to start the metering pump are open, and start the corresponding metering pump to deliver the disinfectant to the dosing point
6. The equipment needs to be pickled every 2 months or so (it depends on the raw materials used on site). The pickling liquid used for pickling is about 10% citric acid solution or about 5% dilute hydrochloric acid to the sodium hypochlorite generator Electrolyte for pickling