The precautions for the recycling and reuse of plastic pallets are worthy of attention. As an indispensable part of the warehousing and logistics industry, plastic pallets play an important role. If plastic pallets are used in accordance with the correct use specifications, not only can they give full play to their own functions, but also can extend their service life and reduce the purchase cost of plastic pallets.
Pallet recycling talk about the following points when using plastic pallets:
The plastic pallet should be handled with care to avoid uneven force and damage when landing.
When placing the goods, they should be evenly placed to avoid side tilt during lifting and handling.
When using the handling equipment, you should consider whether the size of the cargo difference is suitable for the use of this plastic pallet, and avoid improper size and damage to the plastic pallet.
When stacking, the load-bearing capacity of the bottom pallet should be considered.
The correct use of plastic pallets should be such that the packaging combination code is placed on the plastic pallet with appropriate strapping and wrapping to facilitate the use of mechanical loading, unloading and transportation, so as to meet the requirements of loading, unloading, transportation and storage. In order to make the plastic tray can be used safely for a long time, we hope to use the plastic tray correctly according to the following requirements:
Plastic pallets should be protected from sunlight to avoid aging and shorten their service life.
It is strictly forbidden to throw goods in plastic pallets from a height. Reasonably determine how the goods are stacked in the pallet. Place the goods evenly, don't stack them together, or stack them eccentrically. Trays carrying heavy objects should be placed on a flat ground or surface.
It is strictly forbidden to throw the plastic pallet from a high place to avoid breaking and cracking of the pallet due to violent impact.
When working with a forklift or manual hydraulic truck, the fork spurs should be as close as possible to the outside of the fork holes of the pallet. The fork spurs should all extend into the pallet, and the angle can be changed after the pallet is steadily lifted. The spurs should not hit the surface of the pallet to avoid breaking or cracking the pallet.
When the pallet is on the shelf, the shelf-type pallet must be used, and the carrying capacity is determined by the shelf structure, and overloading is strictly prohibited.