(1) Frequently moving parts are refueled by operators once per shift (manual refueling)
(2) The position of clearance movement should be refuelled by the operator once a day (artificial refueling);
(3) Oil is added once a week by the operator to the parts that work for a short time with little operation.
(4) Adding oil to the gearbox once every half month and changing oil once every 2-6 months, which is carried out by professional lubricants;
(5) Motor and saw axle bearings shall be cleaned and oil changed once in each maintenance cycle, and shall be carried out by the maintenance personnel.
Selection of Lubrication Part and Number of Band Saw Machine
The suitable lubricating grease is selected according to the bearing of band saw equipment, the running speed of sliding surface, load, temperature and season. For example: the load of the saw wheel bearing of band saw machine is large, there is possibility of water immersion, and the temperature is low. Calcium base grease and lubricating grease with small penetration should be selected; the load of the roller bearing of the sports car traction device is large, the speed is low, and the speed and direction of rotation are often changed. The oil with high viscosity should be selected, but in winter, the oil with low viscosity and freezing point should be chosen, while in summer, the opposite is true.