1. Poor wear resistance of wood chip machine parts
If the main parts of the machine such as the machine frame and bearings are made of poor materials or have low wear resistance. Then it will affect the use time of the entire machine. When working with materials with excessive hardness, the material's heat treatment process is low and the wear resistance does not exceed the hardness of the material, which will increase wear and tear or even break during use. However, according to statistics, frequent damage to components will not only reduce the life of the machine, but also cause some failures.
2. Improper use and maintenance
虽然 Although the structure of the machine is simple and reliable, it is also strictly carried out in accordance with the operating procedures in use. Many users, due to lack of experience and carelessness, cause improper operation and maintenance and cannot perform better performance. All the details neglected in this work will inevitably accelerate the wear of the consumables, cause the oil path to be unsmooth, etc. After accumulating to the extent, it will cause significant economic losses, and even cause the machine to be scrapped, shortening the service life given by the manufacturer.
3. The natural environment where the chip machine is located
因素 The factors such as extreme heat, severe cold, rain and snow, wind and altitude in the natural environment will greatly affect the normal use of the machine. When the machine is used under extremely hot or cold conditions, measures should be taken to protect the machine, and some parameters of the equipment should be adjusted according to the actual situation.