The integrated wood crusher uses low-voltage or high-voltage motors. Large-scale integrated wood crushers have two types of belt drive and direct drive; the feed can be divided into two ways: horizontal and inclined. There are two ways to discharge. The integrated wood crusher has a compact structure, reasonable layout, easy installation, convenient operation and maintenance, and high production capacity. When cutting logs, the quality of the wood chips is high, and the length of the wood chips can be freely adjusted within the specified range. The output of the comprehensive wood crusher can be selected by users according to their needs. The integrated wood crusher is composed of a machine base, a cutter head, a feed port, a cover, and an electronic control system. The above is what Xiaobian explained to everyone about the comprehensive wood crusher should pay attention to the following points, interested friends to take a look!
1. The main body should be vertical to the horizontal when installing the wood crusher.
2. The equipment shall be installed on a horizontal concrete foundation, and the wood comprehensive crusher shall be fixed with anchor bolts.
Three, after installation, check whether the bolts in all parts are loose and whether the main engine compartment door is tight. If so, tighten it.
4. Configure the power cord and control switch according to the power of the equipment.
5. After the inspection of the integrated wood crusher is completed, a no-load test run is performed, and the test run can be carried out normally.
描述 Production description of multifunctional crusher
(1) Multi-functional shredder can handle a variety of daily necessities. For example, the vortex water-cooled pulverizer is suitable for pulverizing various materials such as PVC, PET, PE, PC, LDPE, HDPE and other plastics, bakelite, resin, inorganic minerals, Chinese and Western medicines, coatings, dyes, grains, and food industries. The fineness after crushing can reach 200 mesh.
(2) The structure is novel. It adopts a wide cavity with water jacket structure. There are four groups of cooling channels. The cooling effect is ideal. It can effectively prevent the powder from sticking to the cavity and sticking. Due to the strict dynamic balance verification process, the machine runs smoothly, with low noise, long service life, small machine size, convenient installation, energy saving, high shift output, and low failure rate, which is suitable for solid material crushing in various industries.