Through interviews and surveys, customers will encounter more or less difficult problems when using the band saw machine. based on the principle of customer convenience and customer service, we will carry out some knowledge explanation activities on the band saw machine products from time to time, discuss the problems that customers often encounter or are difficult to solve, and find solutions. Bring customers help and better use our products. Then, in this period of explanation activities, we will explain the storage of the band saw machine engine. Next, please follow me to see the following article: Storage method of the band saw machine engine :. ①Drain the cooling water in the engine. ② Change the engine oil. New oils are usually neutral and do not corrode the engine's metal parts. ③ Fill the fuel tank with diesel to prevent the fuel tank from rusting. If conditions permit, preservatives should be added. ④ During the shutdown period, the engine should be started once a month to make the machine travel a short distance, and a new oil film should be established at the lubrication place of each part to prevent rust. It should be noted that the cooling water should be filled before starting, and the cooling water should be exhausted at the end.