During the processing of stainless steel strips, there may be difficulties such as high processing strength, laborious cutting, and easy wear. If these problems cannot be effectively solved, the processed stainless steel strips will have rough surfaces and high wear strength, which is not conducive to secondary processing. situation. Then Chengdu Stainless Steel Processing will explain to us how to solve the difficulties in the processing of stainless steel strip?
All stainless steel processing manufacturers have the same feeling: stainless steel is difficult to process. In fact, the reasons are as follows:
1. High cutting force: If the cutting force is large, the strength of the stainless steel strips of different raw materials is inconsistent, so the corresponding force when cutting is relatively large, and it is not easy to be plastic. When selecting technologies such as drilling and boring, try to choose a technology that has greater strength than the processing raw material, so that it is not easy to deform the stainless steel belt, and it can also reduce the cutting strength during cutting.
2. High cutting temperature: From the perspective of thermal conductivity, the stainless steel strip material is not conducive to thermal conduction. During the cutting process, the processing technology and the workpiece want to touch, resulting in high processing temperature, which also adds tool wear. It can be solved by the thermal solution of "Solution Solution, Water Toughness Solution". Without changing the physical data and initial data, the metallographic structure of the processed data must be fine-tuned to improve the temperature during processing .