Stainless steel processing technology Stainless steel processing refers to the process of cutting, folding, bending, welding and other mechanical processing of stainless steel to obtain the stainless steel finished products required for industrial production. Instruments, stainless steel processing equipment. The classification of stainless steel processing equipment is divided into cutting equipment and general disposal equipment, and cutting equipment is divided into Kaiping equipment and slitting equipment. In addition, according to the thickness of stainless steel, there are hot and cold rolling equipment. Thermal cutting equipment should be plasma cutting, laser cutting, water cutting, etc.
Classification of stainless steel processing equipment
Stainless steel profile processing grade original side:
1 Overview of heat treatment and pickling treatment after hot rolling. Generally used for cold-rolled materials, industrial tanks, chemical industry assembly, etc., thicker from 2.0MM-8.0MM.
Dull surface: Those who have been thermally treated and pickled after 2D cold rolling. The material is soft and has a silver-white gloss.
Matte surface: 2B After cold rolling, heat treatment, pickling, and finishing are used to make the profile moderately bright. Because the profile is slippery and easy to regrind, it makes the profile bright and versatile, such as tableware and building materials. After adopting a profile that changes mechanical functions, contentment is effective.
Grit 3 The product ground out with a 100-120 abrasive belt. Has better gloss and has uncontinuous rough lines. It is used in building surface and interior decoration materials, electrical products and kitchen equipment.
Fine sand: 4 The product ground out with a grinding belt with a particle size of 150-180. It has better gloss, uncontinuous rough lines, and finer stripes than NO.3. It is used in mixed halls, decorative materials in building surfaces, electrical products, kitchen equipment and food equipment. # 320 The product was ground with a No. 320 abrasive belt. It has better gloss, uncontinuous rough lines, and finer stripes than 4. It is used in mixing halls, building surface and interior decoration materials, electrical products, kitchen equipment and food equipment. Wool surface HAIRLINE: HLNO.4 is continuously ground by a polishing pad with an appropriate particle size to produce a product of abrasive markings (subdivision 150-320). Primarily used for building decoration, elevators, building doors, surface steel pipes, etc. Bright surface: BA is subjected to bright annealing after cold rolling and flattened. General gloss is good and has high reflectivity. It's like an overview of a mirror. Used in home appliances, mirrors, kitchen equipment, decorative materials, etc. Applications In the field of architectural applications, there are many reasons for the general processing of stainless steel.
Stainless steel processing manufacturers
The erosion profile requires a greasy profile because the profile is greasy and does not easily foul. Dirt deposits can rust and even cause corrosion of stainless steel. In the large hall, stainless steel is a commonly used material for elevator decorative steel pipes. Although the fingerprints of the profile can be lost, it affects the beauty, so it is necessary to choose a suitable profile to prevent leaving fingerprints. Hygiene prerequisites are important for many industries, such as food processing, catering, brewing, and chemical industries. In these application areas, the profile needs to be easy to clean daily, and chemical cleaning agents are often used.
Stainless steel is a good material in this regard. In public places, the overview of stainless steel is often doodled. However, one of its main characteristics is that it can be washed and lost. This is a feature that stainless steel is superior to aluminum. The profile of aluminum easily leaves stale and often difficult to lose. The stainless steel profile should be cleaned along the stainless steel profile, because some profile processing texture is unidirectional. Stainless steel processing is used in hospitals or other hygienic prerequisites, such as: food processing, catering, brewing, and chemicals. This is not only because it is easy to clean every day, sometimes it uses chemical cleaning agents, and because it is not easy to grow substance. Tests have shown that this function is no different from glass and ceramics.