(1) As the spray painting equipment is a special special equipment, it is necessary to implement a special person to be responsible for opening, closing and running inspections.
(2) Design should consider eliminating static electricity. Because the filter material of the paint spraying and exhausting filtering system is mostly chemical fiber products, the filtering material will collect a lot of dust during the air supply and dust exhausting process. Under the power of the fan, there will be more static electricity and discharge due to friction. Without a static elimination device, fires and explosions can easily occur. If the outdoor dust exhaust duct exceeds the height of the building, lightning protection measures should also be considered.
(3) When designing the lighting of the spray paint room, the selected lamps and switches must be explosion-proof to avoid danger when they are turned on.
(4) Explosion-proof fans must be selected for dust exhaust fans, and the noise of fans should not be exceeded.
(5) On the premise of meeting the requirements of the process, it is necessary to use an economical and suitable air supply and exhaust fan. At the same time, the air supply of the fan should be 10% larger than the air exhaust to ensure that the paint room has a slight positive pressure.
(6) When making and installing, you must do it according to the design requirements. Avoid changing the drawings at will to ensure the installation quality of the paint house.
(7) The filters and paint mist purifiers of the exhaust system should be cleaned regularly to prevent damage to the operating environment of the system. It is necessary to establish and improve the relevant maintenance system, and set up a special person responsible.
(8) The solid waste filtered from the dry spray booth and the waste residue filtered from the wet paint booth must be properly treated to avoid secondary pollution.