Similarities: Firstly, both are wood-based panels, and secondly, the two most basic wooden materials in cabinet materials. Explanation of two points: First, in terms of moisture-proof performance, moisture-proof and water-proof can be regarded as equal signs in many people's concepts. In fact, this concept is incorrect. The anti-moisture effect is to mix the anti-moisture agent on the base material of the board. The anti-moisture agent is colorless. In order to distinguish it from the ordinary board, the manufacturer. Green or red pigments are added to the board (generally green is the most common, and the level of red is higher). Colorless, green, and red are only a kind of identification mark, and the moisture-proofing agent can not affect the waterproofness of the board itself. The so-called moisture-proof is only effective for the moisture in the air. Moisture-proofing agents are rarely used abroad because they pay more attention to the environmental protection of materials, the strictness of surface treatment and edge sealing.
Second: The density plate is composed of powder, and it is easy to swell in water. Therefore, it cannot be a cabinet, and because of its poor nailing performance, good quality manufacturers do not use MDF as a cabinet. Particleboard retains more of the natural structure of the wood, with an expansion rate of 8% -10% when immersed in water and good nailing properties, so from the current situation, it is the most suitable for cabinets.