1. Log processing into boards (equipment band saw)
2. Plate drying (drying room)
3. Board sawn into wood selection (multi-saw)
4. Wood square plug (plug machine, direct machine)
5. Wood processing (four-sided planer)
6. Wood square jigsaw
7. Laminated sanding (sanding machine)
8. Laminated blank cutting (precision saw)
9. Integrated wood square open deformation groove (precision saw)
10. High density board cutting (precision saw)
11. Veneer processing (cutting machine, stitch sewing machine, vacuum crawler)
12. Door cover line processing, blanking, jigsaw, sanding, and curved track shoe)
13. Veneer, high density board, composite (hot press)
14. Composite board and wooden door heartwood connection (cold press)
15. Fine cut of wooden door and frame (bilateral saw)
16. Wooden door, frame, edge banding (edge sewing machine)
17. Wooden door, frame, sanding (with sander)
18. Modeling, door core board, pattern (41 machine solid engraving machine)
19. Door frame, core board, beading (vertical planer, wire planer, router)
20. Wooden door assembly (cold press, nail gun, straight nail gun)
21. Wooden door opening (keyhole machine, electric drill)
22. Matching and trial assembly (electric drill)
23. Correcting sanding (sanding machine)
24. Rubbing (filler)
25. Repeat primer (paint room) (bottom depot) (spray gun)
26. First polishing (sanding) (sanding machine)
27. Second pass primer (paint room) (paint, primer) (spray gun)
28. Second degree sanding (sanding machine)
29. Three-pass primer (paint room) (paint, primer) spray gun
30.Three-degree sanding (sanding machine)
31. Color repair (paint room) (paint, primer) spray gun
32. Retouching sanding (1000 # sandpaper)
33. Topcoat (paint room) paint, topcoat, spray gun)
34. Packing (packing room) (carton, film, foam board)
35. Storage (warehouse)