For steel shots, it is a familiar and unfamiliar product for many people, so I will give you an analysis of what steel shots look like? Steel shots are irregular or nearly round. For example, the 1.0 model we often say is not all steel shots are 1.0 in diameter. He may include 0.8-1.2, but according to a certain proportion Filter it out. In addition, the steel shot is a casting product, and casting defects cannot be avoided: hollow and irregular shapes are inevitable, but the hollow and irregular shapes are reduced to a low level, that is, controlled below 5%. The slow cleaning speed is directly related to the choice of steel shot. The model plays a decisive role, and the standard operation of the shot blasting machine must also be emphasized, such as the adjustment of the shot head.
There are several reasons why the amount of steel shot waste is greater than the amount used: Is there a lot of steel shots scattered around the shot blasting machine? Is there a lot of steel shots piled up on the shot blasting machine? Is there a lot of dust outside the shot blasting machine? Gang Wan; the following question may be a bit sensitive, but you must also pay attention to: the worker's work attitude, whether he has a friendly relationship with the supplier in private, whether he has done his relationship; whether the trial selection is different from before. Whether the steel shots used are produced by regular Chinese manufacturers; whether the hardness, chemical composition, pores, and particle size of the steel shots meet the formal standards.
The adjustment of the shot blasting machine and other equipment, the different shot angles of the steel shot, have varying degrees of shadow steel shot consumption rate, the faster the shot speed of the shot, the greater the consumption of the shot, after the inner wall of the shot blasting machine is damaged Failure to timely overhaul, failure to extract the core bone in the bridge cavity, and long shot blasting process, unsealed top tracks of the shot blasting machine, and timely recycling of scattered steel shots can all affect the efficiency of steel shots.