Building safety protection net standard
1. Vertical installation Vertical installation is mostly used for the construction of high-rise buildings. The outside is covered with safety nets. Generally, safety nets woven with thin nylon ropes are used. The safety net should be tightly sealed and firmly fixed to the external scaffolding
2. Horizontal safety nets Horizontal safety nets are mostly used for external scaffolding of multi-story buildings. They are woven with hemp, brown or nylon ropes with a diameter of 9mm. The general specifications are 3m wide, 6m long, and 5cm mesh. A good safety net should be able to withstand an impact load of not less than 1600N.安全 A safety net is set up from the second floor, and every third to fourth floors are set up, and a safety net is also set up with the height of the construction. It is required that the net rope is not damaged, the rooting must be firm, tight, tight, and tightly spliced. The net width is not less than 3m, and the minimum layer width should be 6m.