During the use of the high-temperature paint booth, the configuration of the high-temperature paint booth is the key to the internal structure of the equipment. The quality of the composition will not only affect the use of equipment efficiency, but also directly affect the service life of the high-temperature paint booth.
1. The room is made of EPS one-sided double-sided color steel insulation board. The internal materials include general polystyrene materials, flame-retardant polystyrene materials, and rock wool. The thickness ranges from 50mm, 75mm, 100mm, and 150mm. The thickness of the double-sided color steel plate ranges from 0.25mm to 0.75mm. The colors include sky blue and orange Red, white, etc.
2.The interior of the room is a square pipe welded steel frame structure as a skeleton. The top and bottom are two-layer structures to achieve ventilation and ventilation. The top two floors are filter cotton and its support structure with high efficiency. The bottom is a steel grille. And its bracket.
3, the box is a quaternary structure composed of a burner, a heat exchanger, a fan, and a damper, and it is installed in the box welded by the housing pipe.
4. There are 8 groups of lighting oblique ceiling lights, each with 3 36w tubes, and 8 waist lamps, each with 2 36w tubes.
5. The air supply fans are two 3kw or 4kw dual inlet low noise centrifugal fans.
6. The heating system is a fuel burner or waste oil burner, or 24 groups of 12 infrared heating lamps.
7. The filter system is the primary air filter and the sub-efficient filter cotton. The high-temperature room uses glass wool filter. The baking room is equipped with M-type activated carbon filter and single-layer flat-pumped glass fiber filter.
The above is the equipment required for high-temperature paint booths. The quality and performance of equipment are selected in strict accordance with regulations, so as to ensure the efficiency of the paint booth and extend the service life.