The main function of the environmental protection paint room is to spray paint and dry the surface of the equipment, so as to prevent the items from being corroded and accelerated in harsh environments such as humidity and dust. However, in order to maintain this performance, we need to pay special attention to the maintenance of the equipment. Work in order to guarantee the excellent performance of the equipment.
1. The environmental protection paint room should be replaced with air intake dust filter every 300h, and the dustproof fiber cotton should be replaced every 150h.
2. Clean the air intake dust filter every week and check whether the exhaust air filter is blocked. If the air pressure in the room increases for no reason, the exhaust air filter must be replaced.
3. It is necessary to clean the wall, glass and floor base of the room every day to avoid the accumulation of dust and paint dust.
4. Clean the floor water tray of the paint room every month and clean the diesel filter on the burner.
5. Every quarter should check whether the drive belt of the air inlet and exhaust motor of the environmental protection paint room is loose.
6. Every six months, the entire environmental protection paint room and the floor network should be cleaned, check the circulating air valve, air intake and exhaust fan bearings, check the smoke exhaust passage of the burner, clean the deposits in the fuel tank, clean the water-based protective film of the environmental protection paint room Repaint.
In short, when we use environmentally-friendly paint booths, we must strictly maintain them in accordance with relevant regulations. At the same time, we must also pay attention to cleaning the entire thermal energy converter, including the combustion chamber and smoke exhaust channels, and every year or every work 1200h should timely replace the environmentally-friendly paint roof cotton, so as to promote the performance of equipment and effectively extend the service life.