If you often follow our website, I believe you have a certain understanding of frying equipment. Today I will tell you about the requirements of its components.
1. It plays the role of additional insulation and reinforced insulation. Parts such as frying equipment that may be missed during repair or maintenance should meet the following requirements. It cannot be removed without serious damage; if it is omitted, the appliance cannot work or Is obviously incomplete.
2, The shafts of the operation knobs, handles, push rods and similar parts of the frying equipment should not be charged, unless the shafts are not easily accessible after removing the parts on the shaft.
3.If the knob, handle or push rod is made of metal and may be charged due to insulation failure, it must be fully covered with insulation material or separated by additional insulation.
4. In normal use, the handle continuously held by hand can not touch the metal parts during normal use, unless the metal parts are separated from the charged body by double insulation or reinforced insulation.
5. Frying equipment capacitors should not be connected to the metal parts they touch. In case of metal shells, reinforced insulation should be used to separate them from metal parts.