It is well known that anchor bolts are a very common type of embedded fastener bolts, and according to Xiaobian's knowledge, the installation of anchor bolts is also more convenient. After installation, deviation adjustment is generally performed. about the deviation of anchor bolts Adjustments can be viewed in our previous article, which are explained in great detail.
偏差 The deviation adjustment of anchor bolts is mainly to correct some anchor bolts that are not installed properly. What we are going to say today is what to do if the anchor bolts are damaged. The anchor bolt manufacturers are generally used in current construction projects. In order to fix mechanical equipment to concrete or reinforced concrete foundation, anchor bolts are generally used. once the anchor bolt is damaged, it will directly affect the normal work of the mechanical equipment. If the problem is serious, it will directly cause the equipment to stop running. once the anchor bolts are damaged, it is difficult to repair them in a short time, so the equipment is difficult to use quickly in a short time. The repair of anchor bolts is extremely difficult to return to normal in a short period of time. Therefore, when designing and making anchor bolts in advance, you must pay special attention to the design and processing of each anchor bolt in accordance with regulations. Particular attention must be paid to the installation and use of anchor bolts. This generally means that the installation center and height and verticality must meet the design requirements. When using anchor bolts, if you find any abnormal vibration of the equipment, you must find out the cause in advance and eliminate the fault before running.