Portable polishing machine
Polishing machine is composed of main body, work roll, feed roll for swing frame, brush roll, dust collection system and electric control part. There are three work rolls, namely polishing rolls and leather flannel rolls, respectively equipped with felt rolls, rubber rolls and steel rolls as feed rolls, so that the machine can be thrown more or softly. The abrasive leather roller has a transverse oscillating mechanism, which rotates and grinds back and forth along the roller axis 55 times / min to make the grinding fine.
There are two main types of polishing rollers, which are made of artificial agate and divided into two-way spiral groove rollers from the rollers. They are made of special cloth into a disc shape. The two turbulent pressure covers of the rollers are used to make spiral cloth rollers, or rolled with felt. Wrap it without spiral felt rolls on the surface, and it can also be made into smooth paper (cloth) rolls with velvety soft paper or cloth rolls. They can be used for polishing different leather products and different processes.
The dimensions of the spiral groove angle on the polishing roller are specially designed to facilitate the high-speed rotation of the roller to stretch the leather and polish the motorcycle at the same time. The scraped and scraped leather scraps and dust are discharged from the two ends of the roller along the spiral groove with the airflow. At the same time, the heat dissipation performance of the leather roller is improved, the polishing resistance is reduced, and the continuous polishing time of the roller is extended. The feed roller device is swinging on the swing frame, which is controlled by the foot pedal to approach the polishing roller. Therefore, the swing frame can be adjusted to adjust the gap between the feed roller and the work roller. The brush roller under the polishing roller is used to prevent the work roll from being entangled. Turn the same.
尘 The dust extraction system consists of a work roll protective cover sandwich and a dust extraction air duct in the fuselage to form a dust extraction cavity, and the induced draft fan discharges the dust through the duct through the air duct. The air volume is adjusted by a valve at the exit of the inner tube. Dust is discharged into the dust filter device. A safety baffle is set in front of the protective cover of the work roll. When the hand collides, the feed roll returns to the non-working position, and the main machine stops working. normal work
Polishing machine-mechanical classification
Mold polishing machine
The mold polishing machine adopts imported high-power devices, and the power is increased by 30% compared with similar products. The microcomputer controls the resonance frequency to automatically find and lock the function; the CNC nine-stage vibration magnitude discharge gap tracking adaptation function. Application range of mold polishing machine: Various molds (including hard alloy molds), from complex surfaces, narrow slots, blind holes and other rough surfaces to mirror surface polishing. Can polish various metals, glass, jade, agate, etc.
The flame polishing machine uses electrolyzed water technology. It is powered by water to extract hydrogen and oxygen gas energy equipment. Its hydrogen is used as fuel and oxygen is used to assist combustion. Pollution, high production efficiency, convenient energy saving and so on. Suitable for carrying the aircraft to the wild environment for operation. Suitable for jewelry factory, gold shop, dental, glass and other industries precision welding welding, small casting, small parts quenching and annealing, all kinds of wire welding, high temperature material testing, etc.
The metallographic polishing machine motor is fixed on the fixed base, and the polishing disc is fixed to the motor shaft by a screw sleeve. The polishing fabric is fastened on the polishing disc by a ferrule. After the electric motor is turned on through a switch on the base, the polishing fabric can be polished by applying pressure to the sample by hand. The polishing liquid added to the polishing process can flow into the side plate of the polishing machine through the plastic plate drain pipe on the fixed base. The polishing cover and cover can prevent the dirt and other debris from falling on the polishing fabric when the machine is not in use, which will affect the use effect.
The blade polishing machine blade machining process, due to various reasons, may cause uneven blade margins, and even a workpiece with excessive thickness or thinness may be caused. If a conventional machine is used for polishing, it will cause operator's personal safety. harm. The blade polishing machine comprises a five-axis transmission machine tool. The five-axis transmission machine tool is equipped with a C-axis servo motor power head rotating shaft. The power head rotating shaft 5 is supported at both ends, and the support is connected to the power head. The power head is provided with a bracket, and an abrasive belt motor-driven rotating shaft is fixed on the bracket. The abrasive belt motor motor shaft is provided with an abrasive belt, and the abrasive belt is provided with a spherical pulley. This product is used for blade polishing.
A two-station polishing machine, which includes a frame, a polishing wheel, and a power unit; the polishing wheel is set on the frame, and the polishing wheel is driven by the power unit; the surface of the polishing wheel includes an outer fabric; the polishing machine has two polishing wheels Roulette, two polished roulettes are flat roulette cam discs. The polishing machine of the utility model has a flat-disc cam disc, and users can easily alternately use the flat-disc cam discs to manually polish the surface, convex and concave surfaces of the product, and the work efficiency is high.
Thin-walled part polishing machine, according to the relationship between power and control transmission, it consists of motor drive mechanism, crank transmission mechanism, reciprocating guide rod mechanism, thin-walled part clamp, thin-walled part clamping polishing mechanism, power distribution box, etc. Thin-walled part position fine-tuning mechanism automatically fine-tunes the thin-walled part's spatial position to control the displacement path according to the specific processing path requirements of the mold profile. The advantages of the utility model greatly improve the quality of the surface layer and the stability of the surface performance of the thin-walled parts, and realize the high-precision polishing and mechanization of the thin-walled parts in a real process.