Automatic spray gun is a kind of equipment that uses liquid or compressed air to release quickly as power. It is mainly used for spraying various paints. Today, we are going to share with you the operation skills of automatic spray guns.
1, clean compressed air
的 Air that can be cleaned using an air purification system. Because the pressure in the air hose and regulator is reduced, the inlet pressure of the automatic spray gun must be detected and adjusted.
2, plenty of air
足够 Compressors with sufficient gas production capacity and suitable gas storage tanks. The diameter of the compressed air pipe is the key to obtaining a sufficient amount of compressed air. In particular, the inner diameter of the compressed air hose should be at least 8 mm, so as to avoid too much pressure drop. Special anti-static, thin-material resistant, high-temperature resistant, wear-resistant and pressure-resistant paint spraying hoses should be used.
Automatic spray gun
3, how to adjust the spray pressure
(1) Turn the spraying air pressure adjusting knob clockwise to decrease the spraying air pressure to obtain the maximum atomization effect.
(2) Turn the spraying air pressure adjusting knob counterclockwise to increase the spraying air pressure to obtain the minimum atomization effect.
4, how to adjust paint flow
(1) Rotate the paint flow adjustment knob counterclockwise to increase the needle stroke, thereby increasing the paint flow.
(2) Turn the paint flow adjustment knob clockwise to reduce the needle stroke, thereby reducing the paint flow.
5.How to adjust the spray width (fan surface)
(1) Turn the spray adjustment knob counterclockwise to increase the spray width.
(2) Turn the spray width adjustment knob clockwise to reduce the spray width.