If you want to get a good cleaning effect, we can use a detergent to clean the plastic turnover box, which can improve the cleaning efficiency. Extra thick plastic turnover basket For some specially designed plastic turnover boxes, such as with dead corners and sharp corners, care must be taken when cleaning, and it cannot be used as a bonding point for detergents.
Detergents can generally remove carbonized resins or colorants, but if the gap is too small, it is easy to block the gate, so different plastic turnover boxes will have different cleaning methods.
Some detergents can be used in both open-mold and closed-mold washing methods. Which one is chosen is related to factors such as resin, mold design, and washing difficulty. The open mold washing method is suitable for molds with relatively small cavities, while the closed mold washing method is suitable for molds with more cavities, and the effect is better than the open mold washing method.
Before the plastic turnover box is cleaned, we can increase its temperature, especially the temperature of the gate. This helps loosen the dirt in the turnover box and also enhances the fluidity of the detergent. In addition, we should also pay attention to whether the gap between the gates of the plastic turnover box has detergent requirements. Generally, glass fiber filled detergents are not recommended.
Another point is that the quality of the detergent is very important. A good detergent can enhance the cleaning effect. A poor quality detergent will not only reduce the cleaning effect, but also cause damage to the plastic turnover box. Therefore, the quality of the detergent is also extremely high. important.