After the laying of the filament geotextile is inevitable, some damage problems will inevitably occur. This will require some repair work. Many users do not know much about it. In order to further promote the user's understanding, Laiwu The relevant professional and technical personnel of Jinye Geotechnical Materials Co., Ltd. introduce their related repair work as follows:
The patch material used to fill holes or cracks should be consistent with the filament geotextile. The patch should extend at least 30 cm outside the damaged geotextile. At the bottom of the landfill, if the geotextile crack exceeds 10% of the width of the coil, The damaged part must be cut off, and then the two filament geotextiles are connected; if the crack is more than 10% of the width of the coil on the slope, the roll of geotextile must be removed and replaced with a new roll; the construction staff The work shoes worn and the construction tools used should not damage the filament geotextile, and the construction personnel should not do anything on the laid filament geotextile that may harm the geotextile, such as smoking or poking the geotextile with sharp tools. In addition, in order to ensure the quality of the filament geotextile material, the packaging film should be opened before laying the geotextile, that is, roll a roll, open a roll, and check the appearance quality.