1. Because the filling machine is an automated machine, the dimensions of the easy-to-pull bottle, bottle cushion and bottle cap must be uniform.
2. Before driving, you must turn the machine with a rocking handle to see if there is any abnormality in the rotation. You can drive after confirming that it is normal.
3. When adjusting the machine, tools must be used properly. It is strictly forbidden to use excessive tools or excessive force to disassemble parts to avoid damaging the machine parts or affecting the performance of the machine.
4. Whenever the machine is adjusted, in fact, tighten the loose screws tightly, and then turn the machine with a rocking handle to see if its movement meets the requirements before driving.
5. The machine must be kept clean. It is strictly forbidden to have oil, liquid medicine or glass debris on the machine, so as not to cause damage to the machine, it must be:
⑴ In the production process of the machine, timely remove the liquid medicine or glass debris.
前 Clean all parts of the machine surface once before shifting, and add clean lubricant to each activity department.
(3) It should be scrubbed once a week, especially the places that are not easy to be cleaned in normal use or blown with compressed air.