There are many customized products in plastic packaging bags, and vacuum bags are one of them. So what do we need to pay attention to when using this product?
First, you need to be careful not to scratch the vacuum bag with sharp objects. It is recommended to operate on a clean table. If the stored items have hard objects such as buttons and zippers, please fold them inside and put them in the storage bag. Clothes, Quilts and other items should be placed in the bag as far as possible, at least 3-5 cm away from the sealing zipper, large items should not be forced into; to ensure the sanitation of the sealing zipper part, if there is fiber and dust, the sealing function will be reduced, it is recommended to use Close the zipper after scrubbing with water gauze.
Secondly, when using the suction pump, screw the screw interface of the pump to the end, against the red rubber seal of the suction port, to ensure that there is no air leakage at the interface, usually a large bag requires 3 to 5 minutes of suction, generally three, only under five hundred times will there be a significant appearance of flattening. After drawing, it is necessary to check the seal again to ensure the sealing effect.