Glycidyl MethAcrylate 99.5% /cas106-91-2 with high purity and hot sales!
Cas No.:106-91-2
Purity:99%min
Packing:200kg/drum
Specification:
Glycidyl Methacrylate
CAS No.: 106-91-2
formula weight: 142.1525
structural formula: C7H10O3
Glycidyl methacrylate is a colorless transparent liquid, insoluble in water, and soluble in almost all organic solvents, it is irritating to the skin and mucous membranes. Avoid contact with acids,oxides, UV radiation, free radical initiators.
Because molecule contain carbon-carbon double bond and epoxy radical group, which can be used for free radical reactions and ionic reaction. Therefore, it has high reactivity, it is an important
fine chemical materials.
Name: | glycidyl methacrylate | Material: | epoxy chloropropane, methacrylic acid, sodium hydroxid |
Security term | S26:;S28A: | Steam pressure: | 0.582mmHg at 25°C |
Molecular weight: | 142.1525 | Hue(APHA): | 30.0±5.0 |
Density: | 1.095g/cm³ | Specific gravity(20℃,g/ml): | 1.073~1.083 |
Boiling point: | 189°C at 760 mmHg | Viscosity(20℃,CPS): |
2.53±0.05 |
Flashing point: | 76.1°C | Inhibitor content (MEHQ ppm): |
Max.100 |
Purity(%): |
Min.99 |
Acid value(mgKOH/g) : |
0.05±0.01 |
Water content: | Max.0.15 |
Index: | Appearance clear liquid |
Storage method:
1. Store in a cool and ventilated warehouse.
2. Stay away from fire and heat source. The temperature should not exceed 30 ℃.
3. Away from light. Should be stored separate with acids and oxidants, avoid mixing together.
4. Use explosion-proof lighting and ventilation facilities. It is forbidden to use mechanical equipment and tools which are easy to produce sparks.
5. The storage area shall be provided with a leakage emergency treatment equipment and suitable accommodation materials.
Product application:
1There are two functional groups in the GMA molecule, the active vinyl group and the epoxy group with ionic reaction, It can be polymerized in functional groups, and can be polymerized in ionic reaction. Therefore, it can be used for modification of vinyl polymers and polycondensation polymers. GMA can intervene in three ways: one is involved in the polymerization of ethylene polymerization, the epoxy is located in the branched chain, namely “O” type polymer
2 the other is epoxide cleavage, which is located in branched vinyl, namely “V” type polymer
3the third is the reaction of GMA compounds with active hydrogen, ring opening chain on epoxy. Using any of the three methods, in the polymerization, make polymer modification. In coating, due to adding GMA, can improve the coating's hardness, gloss, adhesion and weather resistance, it can be also used in acrylic coating, alkyd resin coating, vinyl chloride resin and some water-based coatings.
Acrylic adhesive agent, and non-woven fabrics in the use of GMA, can improve the adhesion of metal, glass, cement and poly vinyl fluoride; when use for non-woven synthetic latex, without affecting the hand, the washing resistance is improved. For synthetic resin material processing, can improve the injection molding, extrusion molding, and significantly improved metal adhesion. For synthetic fibers, can be improve the dyeing strength of fibers with poor dyeing, improve the anti wrinkle improving, color fastness and anti felting ability. This product can improve the sensitivity of photosensitive resin, solution and corrosion resistance.
Main application:
1 Mainly used in powder coating, thermosetting coating, fiber treatment agent, adhesive, antistatic agent, vinyl chloride stabilizer, rubber and resin modifier, ion exchange resin and adhesive for printing ink.
2 Functional monomers used as polymerization. Mainly used in the manufacture of acrylic powder coatings, used as rigid monomer copolymerization with methyl methacrylate and styrene, adjustable glass temperature and flexibility, improve the coating gloss, adhesion and weather resistance. It is also used in the manufacture of acid and non-woven fabrics. As functional monomers, can be used in the manufacture of photosensitive resin, ion exchange resin, chelating resin, selective filtration membrane for medical, dental materials, anti coagulant, on soluble adsorbent etc. Also used for modify polyolefin resin, rubber and synthetic fiber.
3 Because molecule contain carbon-carbon double bond and epoxy radical group, widely used in the synthesis and modification of polymer materials. Used as reactive diluent of epoxy resin, stabilizer for vinyl chloride, rubber and resin modifier, ion exchange resin and adhesive for printing ink. Also used in powder coating, thermosetting coating, fiber treatment agent, adhesive, antistatic agent and so on. In addition, GMA also has a significant effect on the adhesion, water resistance and solvent resistance of the adhesive and non-woven fabrics.
4 In electronics, for photoresist film, protective film, electronic wire, far infrared phase X-ray film. In functional polymer, used for ion exchange resin and chelating resin. In medical materials, for anti coagulation materials, dental materials.
Physical information:
Shape and properties: | colorless transparent liquid | Boiling point(℃,1.33KPa): |
75 |
Relative density: |
1.042 | Melting point(℃): |
-82 |
Solubility | soluble in organic solvents, insoluble in water | Refractive index(20℃,NO25): |
1.4492 |
Self-ignition point/ignition temperature:(℃): |
389 | Low explosive limit(%,V/V): | 1.1 |
Toxicology date:
1 Irritating:
Rabbit stimulate skin: 500ul/24H severe stimulation.
Rabbit stimulate skin : 100mg moderate intensity stimulation.
2. This product is injected into the abdominal cavity of mouse LD50:1.122mg/kg,
rat by mouth LD50:770mg/kg, rabbit skin smear LD50:450mg/kg.
3Irritating to the skin and mucous membrane.
Rat through mouth LD50: 500mg/kg; mouse through mouth LD50: 390mg/kg;
Rabbit skin LD50: 480mg/kg; rat inhaled LC50: 45ppm/4H.
4Acute toxicity:
Molecular structure information:
Molar refraction: | 35.59 | Molar volume(cm³/mol): |
129.7 |
Parachor(90.2K): |
318.0 | Surface tension(dyne/cm): |
36.1 |
Polarizability: | 14.03 |
Matters needing attention:
1. Harmful by inhalation, in contact with skin and if swallowed.
2. Irritating to eyes and skin.
3. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
4. May cause sensitization by skin contact.
Packing :200kg/drum
One container :16tons
Shipping :about 15days after receive the payment .
Jinan Shijitongda Chemical Co.,Ltd. is a large private chemical enterprise in Jinan combines science, industry and trade. The sales headquarter is located in Jinan, the capital of Shandong Province, where enjoys superior geographic location, convenient transportation and logistics and can provide a variety of high quality chemical products with reasonable price at a high rate of speed.
The company is specialized in the R & D, production and marketing of fine chemical products and has gathered a number of competitive chemicals by self-built production base, equity participation and holding and various forms. The products related all kinds of chemical raw materials, pharmaceutical intermediates, pigment and dye intermediates, chemical reagents, food additives, etc. Our products, trichlorethylene, isopropanol, tetrahydrofuran, terephthalic acid, 4-hydroxythiobenzamide, diethylenetriamine, ethylene glycol dimethacrylate and acrylic acid are not only selling well in over 30 provinces and cities in our country, but also exported to the United States, Britain, Japan, Korea, Australia, the Middle East, Germany, India and more than 20 countries.
We are willing to make cooperation based on the understanding and trust for mutual development and! Welcome friends to visit us to guide and negotiate. We will provide you the best services and listen to your needs and suggestions. We are looking forward to hear you!
Pre-Sales Service
* prompt reply and 24 hours online, professional
team to provide best price and high quality
product.
* Sample testing support.
* Every batch of products will be tested to ensure
its quality.
After-Sales Service
*The fact of logistics information monitoring.
*Product has any problem can return.
* Any questions about the product can be consulted at any time.
1.Q: What are you target clients?
importers or customers in fluoro-products, boric acid, heterocyclic compounds, intermediates and APIs,etc.
2.Q: Do you supply free samples? How can we get samples from you?
Usually just for VIP customers by express.
3.Q: How do you make a price offer and how long is its validity?
By e-mail 15days.
4.Q: What payment terms do you accept?
L/C, T/T, West Union,Escrow
5.Q: Where do you load the goods?
China main port.
6.Q: Do you accept third party inspection?
Yes.we do
7.Q: Can I pay with a credit card?
Of course you can.
8.Q: Is the product harmful to human health?
According to the product property.
9.Q: What types of containers are used to package products from your company?
20'FCL,40’FCL or as customer requirement.
10.Q: Is your company able to accept custom and meet customer specific specification requirements?
Yes,we can.
Our tenet is "Quality and customers are number one priority to Shijitongda, Honest business, openness and innovation". We look forward to cooperating with customers all over the world for bright tomorrow.
Our web site is www.jsnjtd.com