1.0mm smooth dam lining high-quality HDPE geomembrane
Product Description
HDPE Geomembrane liner is made from polyethylene polymer materials that blow molding, its main function is to prevent the liquid leakage and gas volatile. According to the production of raw materials can divide into HDPE geomembrane liner and EVA geomembrane liner, etc.
Geomembrane is a kind of waterproof material of high molecular polymer. It is mainly divided into HDPE geomembrane, LDPE geomembrane, PVC geomembrane and all kinds of composite geomembrane.
Product index
HDPE Geomembrane Ministry of Construction Standard CJ/T234-2006
|
Properties |
Test Method |
HDPE-Smooth |
||||
|
Thickness(min.ave.) |
ASTM D 5199 Mm(mil) |
0.75(30) |
1.00(40) |
1.5(60) |
2.0(80) |
2.5(100) |
|
Density |
ASTM D 792 g/cm3 |
≥0.94 |
≥0.94 |
≥0.94 |
≥0.94 |
≥0.94 |
|
Tensile Properties(min.ave.) |
ASTM D 638 Tipo IV |
|
|
|
|
|
|
Yield Strength |
Kn/M(lb/in) |
11(63) |
15(84) |
22(126) |
29(168) |
37(210) |
|
Break Strength |
Kn/M(lb/in) |
20(114) |
27(152) |
40(228) |
53(304) |
67(380) |
|
Yied Elongation |
% |
12 |
12 |
12 |
12 |
12 |
|
Break Elongation |
% |
700 |
700 |
700 |
700 |
700 |
|
Tear Resistance(min.ave.) |
ASTM D 1004 N(lb) |
93(21) |
125(28) |
187(42) |
249(56) |
311(70) |
|
Puncture Resistance(min.ave.) |
ASTM D 4833 N(lb) |
240(54) |
320(72) |
480(108) |
640(144) |
800(180) |
|
Carbon Black Content |
ASTM D 1603 (%) |
2~3 |
2~3 |
2~3 |
2~3 |
2~3 |
Note:The table contents are subject to change without notice.
Our Products
Our Packaging
Application
Product Features:
Good penetration resistance
Good softness
Strong toughness
High transparency
Lightweight
High-temperature resistance
Long service life
Easy to operate
