Safety Net Fall Protection

Product Introduction Of The Safety Net Fall Protection 

Safety net fall protection is suitable for high-rise building construction, shipbuilding, ship repair, water loading and unloading, large equipment installation and other high-altitude, work places. Safety net fall prevention is used to prevent people and objects from falling or to avoid falling down injuries. The safety net fall prevention is divided into ordinary safety net, flame retardant safety net, dense mesh safety net, block net and anti-fall net. Its materials are mainly nylon, vinylon, polyester, polypropylene, polyethylene and silk. 

Parameter Of The Safety Net Fall Protection

Tips: 
Building safety net standard

1.Vertical setting Vertical setting is mostly used for the outer scaffolding of high-rise building construction. The outer side is covered with safety net enveloping. Generally, a safety net woven with fine nylon rope is used. The safety net should be sealed and securely attached to the outer scaffolding

2. Horizontal safety net horizontal safety net is used for outer scaffolding of multi-story building. It is woven with hemp rope, brown rope or nylon rope with a diameter of 9mm. The general specification is 3m wide, 6m long and 5cm mesh. A good safety net should be able to withstand impact loads of not less than 1600N. From the second floor, there is a safety net, and every 3 to 4 floors are set up one by one. At the same time, a safety net with the height of construction is set up. It is required that the rope is not damaged, the rooting should be firm, tight, tight, and spliced tightly. The mesh rod should be made of steel. The mesh width is not less than 3m, and the minimum layer width should be 6m.

3 horizontal safety net support method
(1) Using the external wall window support method, the crossbar 1 is placed in the wall of the upper window and is fastened to the inner cross of the safety net. The crossbar 2 is placed outside the wall of the lower window and the diagonal of the safety net is maintained. The crossbar 3 is placed in the wall and tied to the crossbar 2, and the spacing of the diagonal bars supporting the safety net should be no more than 4m.
(2) Use the steel hanger to erect the safety net. The windowless window can be erected with a steel hanger. The hole is reserved on the wall, the pin is inserted, and the pin is wedged. The lock piece has 14 holes for hanging. The safety net of the boom, the steel hanger is Ф 12 steel bar, about 1.56m long, the upper end hook, the back of the hook is welded with a hook to hang the safety net. The lower end is welded with a diagonal rod movable hinge seat and a wall support leg, and a wall plate and a nylon rope ring are welded near the upper end hook (hook), and the function of the wall plate is to ensure that the boom is not stressed. An optional option has occurred. The distance between the booms is generally 3 to 4 m.

(3) The first-story long-span safety net of the first-floor large-span safety net can be set up with cedar slanting braces or one side. Building protection net vertical net: In the real estate construction, in order to prevent the high-rise building materials and construction workers from falling, the building protection vertical net is used to surround the building to avoid casualties.
Uses: Mainly used to prevent people and objects from falling or used to avoid and mitigate falling object damage, to protect the safety of high-level workers and pedestrians and to clean the maintenance site.