The PVC board manufacturer Lixin introduced that PE board is a highly crystalline, non-polar thermoplastic resin. The appearance of the original HDPE is milky white, and the thin section is translucent to a certain extent.
PE board has excellent resistance to most domestic and industrial chemicals. Certain types of chemicals can cause chemical corrosion, such as corrosive oxidizers (concentrated nitric acid), aromatic hydrocarbons (xylene) and halogenated hydrocarbons (carbon tetrachloride). The polymer is non-hygroscopic and has good water vapor resistance and can be used for packaging purposes. HDPE has good electrical properties, especially the high dielectric strength of the insulation, making it very suitable for wires and cables. Medium to high molecular weight grades have excellent impact resistance, even at room temperature and even at low temperatures of -40F. The unique characteristics of various grades of HDPE are the proper combination of four basic variables: density, molecular weight, molecular weight distribution and additives. Different catalysts are used to produce customized polymers with special properties. The combination of these variables produces HDPE grades for different purposes; achieving the best balance in performance. It has good chemical stability and can resist most acids, alkalis, organic solutions and hot water. Good electrical insulation.
PVC board manufacturers introduced that PE board has the characteristics of high toughness, tensile strength, corrosion resistance, low temperature resistance and good wear resistance. It is widely used in chemical, clothing, packaging, food and other fields. It can be filled, flame-retardant, modified, and the surface can be embossed and frosted. LDPE (high-pressure low-density polyethylene) has softer properties, lower mechanical strength, and lower melting point, making it suitable for film and cable insulation. HDPE (low pressure high density polyethylene) has higher rigidity, higher mechanical strength, and higher melting point. Suitable for making hollow products, injection products, etc., widely used in the manufacture of ice hockey rink wall panels, thickness: 1-350mm, colors: natural, white, blue, yellow, gray, black, green, etc.
