Product Description
High efficient aliphatic water reducer power for cement countertops CL-ZF
Water reducing rate 25%
with the dosage of 1.0-2.0% of CL-ZF
Tested by Shanlv P.O.42.5 ordinary portland cement
Materials fully chemical reaction → pure appearance→stable quality
Specifications: | ||||
(1) Powder (with a solid content ≥92%, solid, suitable for a long distance transportation) , or liquid (with a solid content of 20%-50%). | ||||
(2) With a high slump retention ability, without concrete segregation, with a much smaller slump loss than that of other superplasticizers. | ||||
(3) With a good dispersion, an excellent adaptability to different cements, and good water-reducing properties. A high water-reducing ratio up to 25% could be obtained when used in high strength grade concrete.(higher than C50). With a dosage of 1.0-2.0%,water reducing rate up to 25%. | ||||
(4) Low chloride content, and no corrosion to steel. | ||||
(5) Cement paste fluidity ≥230mm (with a dosage of 1.0-2.0%). | ||||
Applications: | ||||
(1) Used in high performance and high strength concrete with high construction requirements. | ||||
(2) Used in high slump concrete, ready mixed concrete, and pumping concrete. | ||||
(3) Used in the concrete of high buildings, hydraulic engineering, transport system, port engineering, and municipal engineering etc. | ||||
(4) Used in other high-lift concrete for specific buildings. | ||||
Uses and Cautions: | ||||
(1) A recommended dosage is 1.0%-2.0%. Actual dosages should be determined by mixture design test according to concrete strength grade. | ||||
(2) It is required that the tolerance must be less than 0.2%. | ||||
(3) 0℃-40℃ the shelf life of liquid products is 12 months. After expiration date, concrete test must be carried out to confirm the quality. | ||||
(4) Concrete test must be carried out before utilization. | ||||
(5) This product is forbidden to be mixed with naphthalene superplasticizers. | ||||
(6) Experiment must be done when it is used together with other admixtures. |