Self-leveling cement additive/Selflevelling/cement admixture price
Binzhou Chengli Building Materials Co., LTD is located in the beautiful scenery of the City of Binzhou, north of China. The company is specialized in Aliphatic water reducer,polycarboxylate superplasticizer,Aminosulfonate-based superplasticizers,Naphalene-based water reducing,wooden cellulose superplasticizers,sodium gluconate,pumping aid,lauryl sodium sulfate,etc.peoduction.
you can be assured of the best quality and price here.
Item | Test Result |
Appearance | natural or faint yellow(liquid) |
Density | 1.11 ±0.05g/cm3 |
PH | 7 ±1 |
Solid content | 40 ±0.5 |
CL- content | <=0.10% |
Na2 SO4 | <= 5.0% |
Water reducer rate | ≥32% |
Dosage | 0.4% |
Expiration date | 1 year |
Chemical component |
alkali content ≤0.15% Chlorine ion content ≤0.15 Sodium sulfate content ≤0.25% |
Advantage:
(1) Powder (with a solid content ≥92%, solid, suitable for a long distance transportation) , or liquid (with a solid content of 20%-50%).
(2) With a high slump retention ability, without concrete segregation, with a much smaller slump loss than that of other superplasticizers.
retention
(3) With a good dispersion, an excellent adaptability to different cements, and good water-reducing properties. A high water-reducing ratio up to 25% could be obtained when used in high strength grade concrete.(higher than C50). With a dosage of 1.0-2.0%,water reducing rate up to 25%.
(4) Low chloride content, and no corrosion to steel.
(5) Cement paste fluidity ≥230mm (with a dosage of 1.0-2.0%).
Application:
(1) Used in high performance and high strength concrete with high construction requirements.
(2) Used in high slump concrete, ready mixed concrete, and pumping concrete.
(3) Used in the concrete of high buildings, hydraulic engineering, transport system, port engineering, and municipal engineering etc.
(4) Used in other high-lift concrete for specific buildings.
Uses and Cautions:
(1) A recommended dosage is 1.0%-2.0%. Actual dosages should be determined by mixture design test according to concrete strength grade
(2) It is required that the tolerance must be less than 0.2%.
(3) 0℃-40℃ the shelf life of liquid products is 12 months. After expiration date, concrete test must be carried out to confirm the quality.
(4) Concrete test must be carried out before utilization.
(5) This product is forbidden to be mixed with naphthalene superplasticizers.
(6) Experiment must be done when it is used together with other admixtures.