It's a heat shrinkable insulation cap suitable for insulation bus bar up to 1kV, designed for complex bus bar geometry and restricted , interview areas where no open end is available. It's devised to be compatible with low-voltage insulation tubing.
Features Of Pipe
After heating, formed corrosion protection seal
Formidable backing provides outstanding waterproofing effect
High chemical resistance. combat impact, abrasion and ultraviolet light.
Outstanding resistance against cathodic dissolve, dielectric breakdown.
Specification
|
Property |
Test Method |
Typical Data |
|
Operating temperature |
IEC 216 |
-55 to +110 ℃ |
|
Tensile strength |
ASTM D 638 |
>14MPa |
|
Elongation at break |
ASTM D 638 |
>400% |
|
Density |
ASTM D 792 |
1.05 |
|
Elongation at break after aging |
150 /168hrs.℃ |
>300% |
|
Dielectric strength |
IEC 243 |
>15kV/mm |
|
Volume resistance |
IEC 93 |
>1014 Ω. cm |
Progress
Application
Wrap spirally the cap over foreign matters-free and preheated surface, beginning at least 25~50mm (1~2 ) onto pipe coating. Wrap the tape with enough tension to obtain consistency and with minimum 50% of overlapping, while removing the release liner. Warm the end part of the tape and press down firmly. Using a torch, start at the edge of the tape and heat circumferential the coated pipe.Finish off by heating over the entire tape vertically to ensure a uniform adhesion and by using a roll or gloved hands to remove wrinkle and air.
Factory
Our Service
top quality
Reply your inquiry in 24 working hours.
Delivery the output to our customer all over the world with velocity and precision.
Offer the output with superior quality.and competitive price.
100% QC checking before shipment.
FAQ
Q:Are you a factory?
A:We are a joint venture manufacturer between Chinese sourcing company with a professional heat shrink background specialist.
Q: How to ship my order? Is it safe?
A:For small package, we will send it by Express, such as DHL and,USP, TNT. For big package, we will send them by air or by sea. We will use good packing and ensure the goods safety
Q:Can you provide samples? Are the samples free?
A:YES, we can provide samples free for your testing, air freight fee take by
customers but once place order we will refund this fee from order
Q:Could I put my own logo on it?
A:Sure, of course, We are a professional manufacturer and have over 12 years OEM experience
Q:How long is the delivery time?
A:It depends on the quality.For sample or regular items in small qty, we promise to send in 1-3days, most have in stock For mass production, we promise to send in 30 days
Q:How do you make our business long-term and good relationship?
A:We keep good quality and competitive price to ensure our customers benefit,meanwhile we respect every customer as our friend and we sincerely do business with them.
Packing And Shipping
